FREE* STLs for FULL Two Storey House Scenery Terrain by Iconic Miniature suitable for D&D or Warhammer
The files for this supportless Free for personal use 3D printable Two Storey House were tested on a 3D resin printer with water-washable resin and with 2 sec. exposure per layer!
In the archive file you will find all STL files for this two-storey rural house:
FLOOR 1:
– Ground Floor Base 1 – if the base does not stick to the building plate of your resin printer – tilt it 10 degrees and use light support with 60 % density.
– Front Wall for Base 1 with a window and door hinges – if the wall do not stick to the building plate on your resin printer – use light supports with 60 % density.
– Side Wall for Base 1 with a window – see above comment about the walls
– Side Wall for Base 1 with cracks – see above comment about the walls
– Ground Floor Base 2 – see above comment about base 1
– Side Wall for Base 2 with a window – see above comment about the walls
– Side Wall for Base 2 with cracks – see above comment about the walls
– Back Wall for Base 2 with Chimney – see above comment about the walls
– Stairs – two parts – flight of stairs and support beams
– Door
– Window Shutters Part 1 – print 5 times this window shutter part for the whole house
– Window Shutters Part 2 – print 5 times this window shutter part for the whole house
– Bolt – print 22 times the bolt for all shutters and door
FLOOR 2
– Second Floor Base 1
– Front Wall for Base 1
– Left Side Wall for Base 1
– Right Side Wall for Base 1
– Second Floor Base 2
– Back Wall for Base 2 with chimney
– Left Side Wall for Base 2
– Right Side Wall for Base 2
ROOF
– Roof Part 1
– Roof Part 2 with chimney hole
You can download after